![]() |
![]() |
||||
![]() |
Many systems designers continue to regard the power supply as a simple
straightforward part of their system and either design it themselves or choose
“off the shelf” products from distributors’ catalogues. Both these routes
provide what is usually an unsatisfactory solution. The design of complex
multi-output power supplies with high efficiency and high power density is a
difficult task, and choosing “standard” products is invariably a compromise. Albacom can offer a solution, which cuts through these problems and allows
you to concentrate on the design of your system. We will configure a power
supply which matches you requirements exactly. Your voltages, power levels,
current limits, and your control and monitor requirements. We will even meet
your mechanical configuration requirements. We select power modules from the best manufacturers in the world to configure
a power supply system for you, which will meet the most demanding requirements
for stability, ripple, protection, and reliability. Because we use this approach, independent regulation and current limiting of
individual outputs is easily achieved, and high standards of reliability are
assured. Single output and multiple output power supplies can be configured for any
combination of output voltages from 2V to 48V, with no upper power limit, and
can incorporate power factor correction, built-in-test features, and control and
monitor features. Any internationally available mains supply can be supported.
DC prime power inputs can also be catered for. The standard packaging format is 19-inch racking, which supports easy
integration with your system, but custom mechanical configurations can also be
offered. A solution incorporating your cooling preferences and connector
preferences can be engineered to exactly match your system requirements. Custom-configured low voltage power supplies from Albacom are intended for
application in industrial process equipment, communications systems, scientific
research, and any electronic system using low-voltage DC power. All products comply with EC low voltage and EMC directives. For more detailed information, please go to our Customer Area. |
||||
About Albacom | Home
- Power | Home - Defence | Home - Micro | Customer Area | |||||
|
Albacom Ltd George Buckman Drive, Dundee, DD2 3SP Tel: +44(0)1382889311 Fax: +44(0)1382810171
|
|||||